BXKRM - D-44 CERAMINC WALL ADHESIVE
- MSDS: BXKRM
- Manufacturer: DAP INC
- Product Name: D-44 CERAMINC WALL ADHESIVE
- National Stock Number: 8030-00F039887
Product Identification
Product ID:D-44 CERAMINC WALL ADHESIVE
MSDS Date:02/14/1992
FSC:8030
NIIN:00F039887
MSDS Number: BXKRM
Responsible Party
DAYTON, OH 45401-0277
US
Emergency Phone: 513-667-4461/800-543-3840
Info Phone: 513-667-4461/800-543-3840
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
PETROLEUM MINERAL OIL *95-1*
CAS: 64742-06-9
Fraction By Weight: 1-5%
ETHYLENE GLYCOL, GLYCOL
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1-3%
OSHA PEL 50 PPM
ACGIH TLV: C 127 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 1-5%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
NONYLPHENOL POLYOXYETHYLENE ETHER; POLYOXYETHYLENE
CAS: 9016-45-9
RTECS: MD0900000
Fraction By Weight: 1-5%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
CLAY (KAOLIN), ALUMINUM SILICATE
CAS: 1332-58-7
RTECS: GF1670500
ACGIH TLV: 10 MG/CUM TOTAL DUST
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY IRRITATE EYES, SKIN & RESPIRATORY
TRACT. HARMFUL IF INHALED. HARMFUL/FATAL IF SWALLOWED. INHALATION
MAY AFFECT THE BRAIN/NERVOUS SYSTEM. INGESTION OF ETHYLENE GLYCOL
CAN CAUSE GI IRRITATION AND IF CONSUMED IN SUFFICIENT QUANTITIES
DEATH. PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE FOR
PROLONGED/REPEATED EXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, VOMITING, DIARRHEA, DEPRESSED
RESPIRATION, DIZZINESS, HEADACHE, NAUSEA.
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:>200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL/SCRAPE UP DRIED
MATERIAL & PLACE IN CONTAINERS.
Handling
Other Precautions:DON'T REUSE EMPTY CONTAINERS.
Exposure Controls
Respiratory Protection:8 HR EXPOSURE LIMIT/VALUE IS EXCEEDED FOR ANY
COMPONENT, USE AN APPROVED NIOSH/MSHA RESPIRATOR.
Ventilation:MECHANICAL (GENERAL/LOCAL): SUFFICIENT
Protective Gloves:SOLVENT IMPERVIOUS
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:EYEWASH & SOLVENT IMPERVIOUS APRON IF BODY
CONTACT W/PRODUCT MAY OCCUR. BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Spec Gravity:1.17
Evaporation Rate & Reference:(N-BU AC=1): <1
Appearance and Odor:BUFF COLORED PASTE
Percent Volatiles by Volume:45-50
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS & CAUSTICS
Stability Condition to Avoid:HEAT, FREEZING
Hazardous Decomposition Products:CARBON/NITROGEN OXIDES.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. LIQUIDS CAN'T BE DISPOSED OF IN A LANDFILL. DON'T
REUSE EMPTY CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.